Free Cisco SPRI 300-510 Actual Exam Questions - Question 3 Discussion
Question No. 3
Refer to the exhibit.
Routers R1 and R2 are RFC 5036-based MPLS-enabled core routers MPLS IP is enabled globally on
both routers OSPF with area 0 configuration is used as an interior routing protocol between the
routers After new services were enabled on the MPLS network, LDP connectivity failed on R1
TCP/UDP port 711 is confirmed to be open Which two actions must the engineer take to correct the
problem? (Choose two.)
Routers R1 and R2 are RFC 5036-based MPLS-enabled core routers MPLS IP is enabled globally on
both routers OSPF with area 0 configuration is used as an interior routing protocol between the
routers After new services were enabled on the MPLS network, LDP connectivity failed on R1
TCP/UDP port 711 is confirmed to be open Which two actions must the engineer take to correct the
problem? (Choose two.)
Select all that apply, then reveal solution.
US
MK
Marco K.
2026-02-21
A/D? The issue seems to be with OSPF not advertising the right subnet on R2, so adding the full /24 network is key. Plus, enabling MPLS IP on Gi0/0 on R1 is necessary for LDP to work.
0
UD
Usman D.
2026-01-17
Is the exact subnet mask and area number for the OSPF network on R2 confirmed? The options mention different masks and area 0, but clarity would help pinpoint the missing OSPF config.
0