Question 1

Which of the following la an eligible source of renewable energy tot Green Infrastructure and Buildings Credit. Renewable Energy Production?

Accepted Answer

A

Explanation: For the Green Infrastructure and Buildings Credit related to Renewable Energy Production, wind energy is an eligible source of renewable energy. LEED recognizes wind energy as a clean and sustainable energy source that contributes to reducing greenhouse gas emissions. Other options, such as ground-source heat pumps, are not considered renewable energy sources because they typically rely on electricity or other energy sources to operate. Combustion of municipal solid waste and forest biomass waste may produce energy, but they are not categorized as renewable in the context of LEED's Renewable Energy Production credit.

Question 2

A mixed-use LEED for Neighborhood Development project includes a 20,000 ft2 (1.858 m2) office
building with retail space on the first floor. There are 1.000 ft7 (93 m2) surface parking lots located on
each of Ihe four sides of the budding.
Who! improvement is needed to make the plan eligible for Neighborhood Pattern and Design Credit.
Reduced Parking Footprint?

Accepted Answer

B

Explanation: To be eligible for the Neighborhood Pattern and Design (NPD) Credit for Reduced Parking Footprint, a project must minimize the amount of land dedicated to parking. Specifically, this credit discourages parking lots located in front of buildings, as they detract from the walkability and pedestrian-friendly environment that LEED ND encourages. By removing the surface parking lot in front of the building, the project can improve its walkability, reduce the parking footprint, and better align with the credit requirements. Reference: LEED v4 for Neighborhood Development, Current Version LEED Reference Guide for Neighborhood Development

Question 3

According to Green Infrastructure and Buildings Prerequisite. Indoor Waler Use Reduction, the
indoor water usage of a new building or buildings undergoing major renovations (nonresidential
buildings, mixed-use buildings, and multifamily tour stones or more), must average at least

Accepted Answer

B

Explanation: The Green Infrastructure and Buildings Prerequisite for Indoor Water Use Reduction requires that the indoor water usage of new buildings or buildings undergoing major renovations must average at least 20% less than in baseline buildings. This prerequisite is aimed at promoting water conservation through the use of efficient plumbing fixtures, appliances, and systems, contributing to the overall sustainability of the project by reducing water demand and minimizing the strain on local water resources.

Question 4

A neighborhood project pursuing LEED for Neighborhood Development certification has 10 existing
single family homes and is planning to construct 25 new single family homes Which of the following
is Hue in order for the project to comply with GIBc Minimum Building Energy Performance?

Accepted Answer

D

Explanation: For the Neighborhood Pattern and Design Credit concerning Minimum Building Energy Performance (GIBc), the requirement is that 90% of all new homes (in this case, the 25 new homes) must meet the requirements of the LEED for Homes v4 Minimum Energy Performance prerequisite. This ensures that the new homes are designed and constructed to be energy-efficient, reducing overall energy consumption and greenhouse gas emissions. The option of applying the ASHRAE Standard 90.1-2010 does not apply to single-family homes under LEED ND; instead, the LEED for Homes rating system is used for residential projects.

Question 5

A community seeking LEED tor Neighborhood Development Certification is planning to design and construct a permanent garden and provide related facilities for local residents to cultivate food production. The community Is in an area of 10 acres (4.05 hectares) and contains 120 dwelling units. According to the requirements of 'local food production.* what is the minimum area of the community garden? A) https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/US_Green_Building_Council_LEED-AP-ND/page_33_img_1.jpg B) https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/US_Green_Building_Council_LEED-AP-ND/page_33_img_2.jpg C) https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/US_Green_Building_Council_LEED-AP-ND/page_33_img_3.jpg D) https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/US_Green_Building_Council_LEED-AP-ND/page_33_img_4.jpg

Accepted Answer

C

Explanation: :

Question 6

For a LEED for Neighborhood Development project that has yet to earn all land use entitlements, which of the following should the project team pursue to assist with local approvals?

Accepted Answer

C

Explanation: When a LEED for Neighborhood Development project has not yet secured all land use entitlements, one effective strategy to assist with local approvals is to pursue a "LEED for Neighborhood Development: Plan" designation. As part of this process, the project team can seek a Letter of Support from the USGBC or another relevant authority. This letter serves as a formal endorsement of the project’s sustainability goals and alignment with LEED ND principles, which can be persuasive in negotiations with local authorities and stakeholders. It demonstrates a commitment to sustainable development, which can help to secure the necessary approvals. Reference: LEED v4 for Neighborhood Development, Current Version LEED Reference Guide for Neighborhood Development

Question 7

Which of the following sites meets the Minimum Program Requirements (MPR) for a project targeting LEED for Neighborhood Development certification?

Accepted Answer

B

Explanation: To meet the Minimum Program Requirements (MPR) for a LEED for Neighborhood Development (LEED ND) certification, a project must encompass a minimum area that includes at least one habitable building. The MPRs are designed to ensure that the project is of a scale that supports neighborhood-level sustainability strategies. A site with an area of 1,200 acres (465.62 hectares) containing five habitable buildings meets these requirements. The presence of multiple habitable buildings aligns with the intent of the LEED ND program to develop sustainable, vibrant neighborhoods. Reference: LEED v4 for Neighborhood Development, Current Version LEED Reference Guide for Neighborhood Development

Question 8

Winch of the following general strategies is acceptable under Neighborhood Pattern and Design Credit. Reduced Parking Footprint?

Accepted Answer

D

Explanation: The Neighborhood Pattern and Design Credit for Reduced Parking Footprint aims to minimize the environmental impact associated with parking facilities and promote sustainable transportation options. Among the choices provided, the strategy of placing carpool spaces within 300 feet (90 meters) of building entrances is an acceptable strategy. This option encourages carpooling and reduces the total number of parking spaces needed, thereby supporting the overall goal of reducing the project's parking footprint. Off-street parking in front of buildings and large surface parking lots are generally discouraged as they contribute to sprawl and are less sustainable.

Question 9

A LEEDV for Neighborhood Development registered project is planning on using air conditioning
condensate tor flushing toilets in all new buildings. What LEED Prerequisite or credit will this design
help achieve?

Accepted Answer

D

Explanation: Using air conditioning condensate for flushing toilets in all new buildings directly contributes to reducing indoor potable water use, which is the focus of the Green Infrastructure and Buildings (GIB) Credit for Indoor Water Use Reduction. This credit encourages the use of alternative water sources, such as air conditioning condensate, to minimize the consumption of potable water for non-potable uses. By implementing this strategy, the project can demonstrate significant reductions in potable water use, thereby helping to achieve the credit. Reference: LEED v4 Neighborhood Development Guide: The guide outlines the criteria for the Indoor Water Use Reduction credit, including the use of alternative water sources like condensate (USGBC, LEED v4 Neighborhood Development Current Version). LEED Reference Guide for Neighborhood Development: Provides detailed guidance on achieving the Indoor Water Use Reduction credit through the use of innovative water management techniques (USGBC, LEED Reference Guide for Neighborhood Development).

Question 10

What is meant by "connectivity’’ as used in the LEED for Neighborhood Development Rating System?

Accepted Answer

C

Explanation: In the context of LEED for Neighborhood Development, "connectivity" refers to the ease with which people can move through a neighborhood, often measured by the number of publicly accessible street intersections per square mile. High connectivity indicates a well-connected street network, which facilitates walking, biking, and reduces vehicle miles traveled. This contributes to the creation of more walkable, efficient, and sustainable neighborhoods. It is a key factor in promoting active transportation and ensuring that a community is easily navigable.

Question 11

A city is building a mixed neighborhood which is attempting LEED for Neighborhood Development
certification
There are two supermarkets, one former’s market, one bank three restaurants, one laundry and one
hair salon within a 1/2 mi. (0.8 km) walking distance of its geographic center. How many uses should
be counted when attempting Smart Location & Linkage (SLL) prerequisite?

Accepted Answer

B

Explanation: The Smart Location and Linkage (SLL) prerequisite in LEED for Neighborhood Development includes a requirement for Access to Quality Transit or proximity to diverse uses, which encourages projects to be located in areas that provide residents and occupants access to essential services within a walkable distance. LEED defines "diverse uses" as distinct types of establishments that serve different functions, supporting mixed-use development and reducing the need for private vehicle use. In this scenario, there are: Two supermarkets One farmer’s market One bank Three restaurants One laundry One hair salon To meet the requirements of the SLL prerequisite, only one use from each distinct category can be counted. Here, LEED allows only one example of each type of use to be counted toward the total: Supermarket – Only one can be counted, despite having two. Farmer’s market – Considered distinct. Bank – Considered distinct. Restaurant – Only one can be counted, despite having three. Laundry – Considered distinct. Hair salon – Considered distinct. This results in a total of six distinct uses that can be counted when attempting the Smart Location & Linkage prerequisite. Option A: Five is incorrect because there are six unique uses available. Option C: Eight and Option D: Nine are incorrect because not all instances of supermarkets or restaurants can be counted multiple times for the same use category. Thus, Option B: Six is the correct answer based on the distinct uses counted toward the SLL prerequisite (Reference: LEED v4 ND Reference Guide).

Question 12

A 10-acre ((our hectare) project has 5.000 ft (1 524 m) of sidewalks Trees and trellises are planned
along several of those blocks to provide shading for the sidewalks In order to achieve Neighborhood
Pattern and Design Credit Tree-Lined and Shaded Streetscapes. what is the minimum shaded
sidewalk that would need to be provided?

Accepted Answer

C

Explanation: To achieve the Neighborhood Pattern and Design Credit for Tree-Lined and Shaded Streetscapes, a minimum of 60% of the total sidewalk length must be shaded within ten years of landscape installation. For a project with 5,000 feet (1,524 meters) of sidewalks, 60% equates to 3,000 feet (915 meters) of shaded sidewalk. This requirement encourages the development of pedestrian-friendly environments that provide comfort and reduce the urban heat island effect, contributing to the sustainability and livability of the neighborhood.

Question 13

A local zoning code limits density on a residentially-zoned 10-acre (four hectare) parcel to 65 total
units The site la outside of walking distance to transit service. How could this project be eligible for
Neighborhood Pattern and Design Prerequisite Compact Development?

Accepted Answer

C

Explanation: For a project to be eligible for the Neighborhood Pattern and Design Prerequisite on Compact Development, particularly when dealing with density limits, setting aside a portion of the land as a protected community open space easement can help meet the prerequisite requirements. By dedicating 15% of the total land area as protected open space, the project demonstrates a commitment to sustainable land use and enhances community amenities, which aligns with the LEED ND goals. This approach can help to balance density with green space, even in areas where transit service is limited. Reference: LEED v4 for Neighborhood Development, Current Version LEED Reference Guide for Neighborhood Development

Question 14

In a LEED for Neighborhood Development project, in order to earn one point for Innovation Credit. LEED Accredited Professional, the individual must have which accreditation?

Accepted Answer

A

Explanation: To earn one point under the Innovation Credit: LEED Accredited Professional (AP) in a LEED for Neighborhood Development (ND) project, the individual must hold the LEED AP Neighborhood Development (LEED AP ND) credential. This credential signifies that the individual has specialized knowledge in the principles and processes specific to neighborhood development and sustainability, aligning directly with the requirements and intent of LEED ND. Option A: LEED AP Neighborhood Development is the correct answer because to earn this specific credit in a LEED ND project, the LEED AP must hold the Neighborhood Development (ND) specialty. This ensures that the individual’s expertise is aligned with the specific challenges and opportunities in neighborhood development, rather than other building-focused specialties (Reference: LEED v4 ND Reference Guide). Option B: LEED AP Building Design and Construction would not qualify for this credit in a LEED ND project, as it focuses on the building level rather than neighborhood-scale development. Option C: Any LEED AP without specialty credential is not sufficient for the Innovation Credit. LEED requires a specialty credential related to the specific project type (in this case, Neighborhood Development). Option D: LEED AP with any specialty credential is also incorrect because LEED ND specifically requires the Neighborhood Development specialty for this credit, not just any specialty. Thus, the correct answer is A. LEED AP Neighborhood Development.

Question 15

At least how many buildings within a LEED for Neighborhood Development project must be certified by a green building rating system?

Accepted Answer

A

Explanation: For a LEED for Neighborhood Development project, at least one building within the project must be certified by a green building rating system. This requirement ensures that the development incorporates at least one example of sustainable building practices, setting a standard for the rest of the neighborhood. This certification demonstrates a commitment to green building principles and serves as a benchmark for the project's overall sustainability.

Free US Green Building Council LEED-AP-ND Actual Exam Questions