Question 1

https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/NetApp_NS0-520/page_29_img_1.jpg Referring to the exhibit, what is the problem with switch port 0?

Accepted Answer

C

Explanation: :

Question 2

In a Linux environment, issues are reported concerning multipathing. You want to view the direct and indirect paths. In this scenario, which command would you use to accomplish this task?

Accepted Answer

D

Explanation: https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/NetApp_NS0-520/page_79_img_1.jpg

Question 3

Exhibit. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/NetApp_NS0-520/page_66_img_1.jpg The exhibit shows the Inn show command output for the oradata oraFinProd_l LUN. Which two statements ate correct about the LUN'? (Choose two.)

Accepted Answer

B, D

Question 4

Which two components must be verified for a supported NetApp SAN confutation? (Choose two.)

Accepted Answer

C, D

Question 5

You want configure namespaces to support NVMe over Fibre Channel (NVMe/FC) using ONTAP 9.8. Which action will accomplish this task?

Accepted Answer

D

Explanation: Although ONTAP uses a NVMe/FC LIF that is separate from the FCP LIFs, both LIFs can be hosted on the same physical HBA port at both the host initiator and storage target. NVMe/FC and FCP can share the same physical infrastructure concurrently, so the same physical port, cable, switch port, and target port can simultaneously host and transmit both FCP and NVMe/FC frames NVMe can use the same FC infraestructure, but it needs to create a separate NVMe LIF to work. You can find more information on this link: https://www.netapp.com/de/media/10681-tr4684.pdf (14)

Question 6

A customer wants to deploy NVMe/FC along with an existing FC SAN fabric using ONTAP 9.8. In this scenario, which two actions are correct? (choose two)

Accepted Answer

A, B

Explanation: Because NVMe/FC simply swaps command sets from SCSI to NVMe, it is an easy transition to make. NVMe/FC uses the same FC transport and therefore the same hardware from the host, through the switch and all the way to the NVMe/FC target port on the storage array. Thus, NVMe/FC implementations can use existing FC infrastructure, including HBAs, switches, zones, targets, and cabling. You can find more information on this link: https://www.netapp.com/de/media/10681-tr4684.pdf

Question 7

During testing, an administrator notices that the wrong subsystem was returned using the NVMe discover command. The administrator was expecting test0_subsystem as the subsystem Referring to the exhibit, what would cause the discrepancy? https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/NetApp_NS0-520/page_108_img_1.jpg

Accepted Answer

A

Explanation: We can discard that ANA was not properly configured becase this is not a problem about multipathing. We can discard WWPN because this is an NVMe configuration where WWPN is not involved We can discard that NVMe was not configured because we wouldn't be able to even run that command if that's true Configure the NQN correctly is one of the steps when we configure NVMe You can find more information on this link: http://senthil-it-infrastructure.blogspot.com/2020/05/netapp-ontap-97-nvme-configurationand.html

Question 8

Exhibit. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/NetApp_NS0-520/page_58_img_1.jpg You need to configure the SnapCenter Plug-in for VMware vSphere to back up and restore VMware datastores. Referring to the exhibit, which additional LIF type should you create before you configure the plug- in?

Accepted Answer

C

Question 9

You created a LUN in a new volume on your Netapp ONTAP cluster. You enabled the default snapshot
schedule and enabled snapshot autodelete on the volume. In this scenario, in which three situations
does the snapshot autodelete feature automatically delete snapshot copies in the volume? (choose
three)

Accepted Answer

A, C, D

Explanation: Depending on what is selected in the "Trigger" option, Snapshot Autodelete will automatically delete a snapshot when, either the volume space utilized, or the snapshot reserve reaches a threshold capacity specified below. Automatic deletion of Snapshot copies from flexible volumes Data ONTAP can automatically delete one or more Snapshot copies on the volume, provided the Data ONTAP Snapshot copy autodeletion policy is enabled and set to trigger when the overwrite reserve is nearly full on the volume. You can find more information on this link: https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_u se_Snapshot_Autodelete https://library.netapp.com/ecmdocs/ECMP1217281/html/GUID-98FB8EC4-F3AE-4D25-AF44E3200AFEB1AB.html

Question 10

You want to perform online data migration using Foreign LUN Import. In this scenario, which two conditions are required to support this task? (choose two)

Accepted Answer

C, D

Explanation: FLI does not support iSCSI connections directly. In order for iSCSI LUNs to be migrated using FLI, the LUN type must be changed to FC. After the migration is complete, the LUN type is changed back to iSCSI. You can find more information on this link: https://docs.netapp.com/us-en/ontap-fli/sanmigration/concept_lun_requirements_and_limitations.html

Question 11

You need to migrate boot LUNs from a third-party array onto a Netapp FAS8700. Which three actions are required to complete this task? (choose three)

Accepted Answer

B, D, E

Explanation: We only need to convert one FC to initiator per node, if you need to enable multipath with 2 switches, then you need 2 ports on initiator mode per node https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/NetApp_NS0-520/page_99_img_1.jpg https://manualzz.com/doc/24230310/san-migration-using-foreign-lun-import (10) (15)(16)

Question 12

You need to gather information from the host systems that will be attached to the NetApp storage
system using either FC or iSCSI. This information includes operating system version, patch levels,
open bus slots, and cards in bus slots. What other information must you gather from the host
systems?

Accepted Answer

C

Question 13

You are designing a new 4-node AFF A400 SAN cluster with 20 ISCSI hosts. Each AFF A400 node will
have four data LIFs. Each ISCSI host needs to access every LUN over two LIFs per node on every
SAN node.
In this scenario, which Netapp SAN feature enable this connectivity?

Accepted Answer

A

Explanation: SLM will choose 4 LIFs per node, being 8 LIF total (owner and HA partner), enabling portsets will help to limit the ports per node... that way we can stablish only 2 LIF per node. Creating port sets and binding igroups to port sets In addition to using Selective LUN Map (SLM), you can create a port set and bind the port set to an igroup to further limit which LIFs can be used by an initiator to access a LUN. If you do not bind a port set to an igroup, then all of the initiators in the igroup can access mapped LUNs through all of the LIFs on the node owning the LUN and the owning node's HA partner. You can find more information on this link: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sanag%2FGUID5CC27202-A43F-429F-AB13-C70E7CD58E09.html

Question 14

You are implementing a new AFF A800 HA pair and are required to migrate NetApp E-Series E2624
data to the AFF A800 controllers. You do not have a host server that is available for the migration.
In this scenario, which NetApp migration method is supported?

Accepted Answer

D

Explanation: :

Question 15

You
have a 4-node FAS8200 A300 cluster that are using ONTAP 9.3 default settings. For faster
performance, you move a volume with LUNs from a node on the FAS8200 to a node on the AFF A300.
You determine that your SAN host is still using all active/optimized FC paths to the FAS8300 HA pair.
What do you need to troubleshoot to move all active/optimized FC paths to the AFF A300 HA pair?

Accepted Answer

A

Free NetApp NS0-520 Actual Exam Questions