Free Juniper JN0-460 Actual Exam Questions - Question 8 Discussion

Maybe B and D. I’m skipping A because even if it feels like “no config,” usually there’s some baseline setup or enablement in Mist’s system before it kicks in. B and D both talk about captures being tied directly to events or affected items, which fits with how Mist highlights issues automatically for troubleshooting. C sounds off since I doubt it needs global org-level config just for this feature. So probably the auto-association parts in B and D are the key here.

I’m thinking A and D make sense here. A because I read that Mist’s Dynamic Packet Capture doesn’t need upfront config to start working, which fits the “no configuration” claim. D also stands out since captures get linked to affected items automatically after successful client connections. B sounds close but not sure it’s every client event on the Insights page that triggers it. C seems off since global config isn’t required for the feature to run.

It’s B and D, since captures link directly to specific client events and affected items automatically.

Makes sense to rule out C since it says “must be globally configured,” which seems too strict. B and D fit better because the captures are tied to specific client events and affected items automatically. So I’d go with B and D.

Probably B and D since the captures relate directly to events and affected items.

Maybe B and D here. I think A is off because you definitely need to enable packet capture somewhere—it’s not zero-config out of the box. C sounds like too much, since I don’t recall needing org-wide setup beyond enabling it for specific events. B and D fit with the way Mist links captures directly to client events or affected items, which matches how they show in the UI. So I’m going with those two for the correct statements.

B and D make sense, since captures link to client events and affected items.

Maybe B and D. From what I recall, packet capture links directly to client events and affected items, so those make sense. A and C seem off since some setup is definitely needed.

C imo because DPC needs to be enabled at the org level before use, so that rules out A. Also, A doesn’t make sense since you need to at least set it up once. Between B and D, B is correct since the capture ties to client events on Insights, but D seems off because I haven’t seen it automatically attach in the Successful Connects SLE specifically. So I’d go with B and C here.

I think B and D are correct since packet capture is tied to client events and affected items in SLE. A and C don’t sound right to me.