Question 1

How can your customer obtain the PowerShell Library for HPE OneView?

Accepted Answer

D

Explanation: Your customer can obtain the PowerShell Library for HPE OneView by downloading it from the Microsoft PowerShell Gallery. The library is publicly available and can be installed using standard PowerShell commands. This allows users to automate and script HPE OneView operations, enhancing efficiency and integration with existing workflows. Installation Command: Install-Module -Name HPOneView.XXX (Replace 'XXX' with the specific version number) Reference: Microsoft PowerShell Gallery: HPE OneView PowerShell Module HPE OneView PowerShell Library Documentation: Getting Started Guide

Question 2

Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?

Accepted Answer

D

Explanation: https://techlibrary.hpe.com/docs/iss/proliant_uefi/UEFI_TM_030617/s_configure_secure_boot.html

Question 3

HOTSPOT Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/HP_HPE2-T37/page_8_img_1.jpg

Accepted Answer

Explanation: Fabric Type

Question 4

How will setting the Purpose field within the network definition of a server profile impact the network traffic?

Accepted Answer

D

Explanation: :

Question 5

You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?

Accepted Answer

B

Explanation: :

Question 6

Which components require an HPE OneView license for management?

Accepted Answer

A

Explanation: :

Question 7

Which statement about a Logical Enclosure for HPE BladeSystem is Hue?

Accepted Answer

C

Explanation: :

Question 8

You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image
Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be
used In HPE OneView?

Accepted Answer

A

Explanation: Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026422en_us&docLocale=en_US

Question 9

Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?

Accepted Answer

A

Explanation: https://techlibrary.hpe.com/docs/synergy/shared/setup_overview/index.html

Question 10

Which statement about access to HPE Onboard Administrator is true when an HPE BladeSystem enclosure is added to HPE OneView?

Accepted Answer

B

Explanation: :

Question 11

Refer to the exhibit. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/HP_HPE2-T37/page_19_img_1.jpg Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?

Accepted Answer

B

Explanation: :

Question 12

HOTSPOT Click the option that will prevent the appliance from sending any email notifications or forwarding any SNMP traps that are related to the server hardware. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/HP_HPE2-T37/page_33_img_1.jpg

Accepted Answer

Explanation: Enable maintenance mode https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/HP_HPE2-T37/page_33_img_2.jpg

Question 13

Which parameter is defined within an enclosure group for HPE Synergy?

Accepted Answer

B

Explanation: Within an enclosure group for HPE Synergy, you define the uplink set configuration. The enclosure group acts as a template that specifies how logical enclosures are to be configured, including network connectivity through uplink sets. Uplink sets define the mapping of networks to the physical ports on the interconnect modules, enabling consistent network configurations across multiple enclosures. Option B (Correct): Uplink set configurations are defined within the enclosure group to standardize network connectivity. Option A: Power supply location is not configured in the enclosure group. Option C: While interconnect modules are part of the enclosure group, the specific type is defined in the logical interconnect group. Option D: iLO addressing methods are set in the logical enclosure or server profiles, not in the enclosure group. Reference: HPE OneView User Guide: Explains how to create enclosure groups and configure uplink sets (refer to "Managing enclosure groups"). HPE Synergy Enclosure Group Configuration: Provides details on network configurations within enclosure groups.

Question 14

Why is the network unavailable for selection?

Accepted Answer

A

Explanation: The network is unavailable for selection because the customer defined more than 1,024 VLANs, and some of them are unavailable. HPE OneView has a limit of 1,024 networks (VLANs) that can be managed within a single instance. If this limit is exceeded, additional networks become unavailable for use in server profiles or network sets. Option B: Networks that are part of a network set can still be used by compute nodes. Option C: If a network is not defined in an uplink set within a Logical Interconnect Group, it wouldn't be available at all, not just unavailable for selection. Option D: Physical connectivity issues would not make the network unavailable for selection within HPE OneView. Reference: HPE OneView Support Matrix: Specifies the maximum number of networks (1,024) that can be managed. HPE OneView User Guide: Discusses network limitations and how exceeding them affects network availability.

Question 15

Which connection type can be defined within a server profile for an MPE ProLiant DL server?

Accepted Answer

C

Explanation: :

Free HP HPE2-T37 Actual Exam Questions